News

ʻAno ʻĀpana: Thermistor Kūʻē Platinum Kiʻiʻoniʻoni
Nā Ana Mea: 2.0mm x 2.3mm x 1.0mm,1.6mm x 2.0mm x 1.0mm,1.2mm x 2.0mm x 1.0mm
Nā kikoʻī alakaʻi: Length: 10 mm, Anawaena: 0.2 mm
Mea alakaʻi: Platinum-nickel wire (koho: kala-palladium/platinum/silver-nickel)
Ke alakai Tensile ikaika:≥9 N
Kū'ē Kū'ē: 100 MΩ ma 20°C, >2 MΩ ma 500°C
Koehana Mahana (TCR):3850 ppm/°C
ʻO ka hana ʻana i kēia manawa: 0.3 ~ 1 mA (e noʻonoʻo ʻia ka hopena wela ponoʻī)
Paʻa lōʻihi: ≤±0.04% ka neʻe ʻana o ke kūpaʻa ma hope o 1000 mau hola ma 500°C
Manawa Pane:[Kahe (V=0.4 m/s)]t0.5 = 0.05 s,t10 = 0.15 s[Ke kahe lewa (V=2 m/s)]t0.5 = 3 s,t10 = 10 s
Ka helu hoʻomāhana ponoʻī: 0.4°C/mW
Kū'ē Kū'ē: ≥40g ka wikiwiki (10 ~ 2000 Hz mau alapine)
Kū'ē haʻalulu:≥100g ka wikiwiki (8 ms hawewe hapa-sine)
Pākuʻi: ʻO ka paʻi kiʻiʻoniʻoni vacuum (nā ʻano hoʻopihapiha ʻē aʻe i loaʻa ma ke noi)

ʻAno ʻĀpana: SMD Thin Film Platinum Resistance Thermistor
ʻElemu Ana: 3.2mm x 1.6mm x 0.7mm
Koehana Mahana (TCR):3850 ppm/°C
Kaulana ana wela:-50°C a +200°C
Paʻa lōʻihi: ≤±0.06% ka neʻe ʻana o R₀°C ma hope o 1000 mau hola ma 200°C
ʻAno ʻĀpana: ʻO nā pahu pahu pahu
Ke ʻano kūʻai: Reflow soldering a nalu nalu. Paipai ʻia ka paʻi solder wela kiʻekiʻe.
ʻO ke ana wela: 230-240°C

ʻAno ʻĀpana: Platinum Resistance Thermistor
Nā Ana Mea: 2.0mm x 2.3mm x 1.0mm,2.0mm x 4.0mm x 1.0mm
Nā kikoʻī alakaʻi ； Ka lōʻihi: 10 mm, Ke anawaena: 0.2 mm
Mea alakaʻi: Platinum-nickel wire (koho: kala-palladium/platinum/kālā maʻemaʻe)
Ke alakai Tensile ikaika:≥9 N
Kū'ē Kū'ē: 100 MΩ ma 20°C, >2 MΩ ma 500°C
Koehana Mahana (TCR):3850 ppm/°C
ʻO kēia manawa: 0.1–0.3 mA (e noʻonoʻo ʻia ka hopena wela ponoʻī)
Kūpaʻa lōʻihi: ≤±0.04% ka neʻe ʻana o R₀ (0°C kuhikuhi) ma hope o 1000 mau hola ma 500°C
Manawa pane: Kahe wai (V=0.4 m/s):t₀.₅ = 0.05 s,t₀.₉ = 0.15 s;Ke kahe ea (V=2 m/s):t₀.₅ = 3 s,t₀.₉ = 10 s
Huina Hoʻomaʻamaʻa Pono:0.4°C/mW (ma 0°C)
Kū'ē Kū'ē: ≥40g ka wikiwiki (ke alapinepine: 10–2000 Hz)
Kū'ē haʻalulu:≥100g ka wikiwiki (8 ms hawewe hapa-sine)
Pākuʻi: ʻO ka paʻi kiʻiʻoniʻoni vacuum (nā ʻano hoʻopihapiha ʻē aʻe i loaʻa ma ke noi)